Computers: 12 Things You Didn’t Know About ENIAC
digg TOP
  Posted March 9th, 2011 by Zdenko  in Edmonton | 5 comments

Computer history

By: George Jones, Published on MaximumPC portal

Feb. 14 was the 65th anniversary of the first real supercomputer. Is there any better way to celebrate Valentine’s Day than with a dozen ENIAC factoids?

ENIAC. These days, the name conjures up one ginormous lonely computer, a relic of other times. But back in the day – February 14, 1946 to be specific – the US Army thought pretty highly of its brand new Electronic Numerical Integrator and Computer, the world’s first general-purpose electronic computer.

Created with the original intent of calculating artillery firing tables for the Army’s Ballistic Research Laboratory, ENIAC’s completion was announced on Valentine’s Day, and then formally introduced to the American public the very next day on February 15.

This year, our Valentine’s Day ode to computing takes the form of one dozen lovely factoids about ENIAC. Enjoy!

1. Upon being completed, ENIAC contained 17,458 vacuum tubes, 7,200 crystal diodes, 1,500 relays, 70,000 resistors, 10,000 capacitors, and 5 million hand-soldered joints. The total power consumption was a whopping 160 kilowatts. In one second, the ENIAC could perform 5,000 additions, 357 multiplications, or 38 divisions.

2. The total cost of ENIAC, which weighed over 25 tons and took up approximately 680 square feet, was $500,000. That’s about $6 million today, adjusted for inflation.

3. ENIAC was conceived and designed by John Mauchly and J. Presper Eckert. It took Mauchly and Eckert one year to design and 18 months to build it. While the original intention behind ENIAC was to calculate artillery firing tables for the Army, the war was over by the time it was put into service. Instead, the military used the computer for calculations in designing the hydrogen bomb, weather prediction, and a multitude of studies including cosmic-rays, thermal ignition, random numbers, and wind-tunnel design.

4. Programming the ENIAC consisted of operating a massive series of plugs and switches. It took several days to input and run programs on the ENIAC. This said, ENIAC’s power (at the time) was still marvelous; It could perform the functions that one man would spend 20 hours on in around 15 minutes.

5. The original programmers of ENIAC computer were women. The most famous of the group was Jean Jennings Bartik (originally Betty Jennings). The other five women were Kay McNulty, Betty Snyder, Marlyn Wescoff, Fran Bilas, and Ruth Lichterman. All six have been inducted into the Women in Technology International Hall of Fame. When the U.S. Army introduced the ENIAC to the public, it introduced the inventors (Dr. John Mauchly and J. Presper Eckert), but it never introduced the female programmers.

6. Jean Bartik went on to become an editor for Auerback Publishers, and eventually worked for Data Decisions, which was funded by Ziff-Davis Publishing. She has a museum in her name at Northwest Missouri State university in Maryville, Missouri.

7. While ENIAC was capable of performing parallel calculations, thanks to the ability to connect the super-computer’s twenty different accumulators together.

8. Unfortunately, a freeze on design in 1943 meant that ENIAC was not initially capable of storing programs in any type of memory.

9. An extensive 1948 modification allowed the ENIAC to store programs in a rudimentary form of memory. A single-address architecture allowed the three digits of one accumulator to be used as a program counter, while another accumulator was used as the address pointer for reading data. A third accumulator was used as the main accumulator, and the rest of the accumulators were used as data storage. This modification reduced the speed of ENIAC considerably, but also greatly reduced the amount of time it took to program the system.

10. ENIAC was the world’s first general-purpose electronic computer, but its reliance on vacuum tubes initially proved troublesome. In its early years, several tubes would burn out every day, leaving the computer inoperable for about half the time it was on. One of the reasons ENIAC was never shut off was because the main cause of vacuum tube failures was turning it on – the warm-up and cool-down periods created the most thermal stress.

11. ENIAC ran continuously from July 29, 1947 to October 2, 1955.It was replaced by the Electronic Discrete Variable Automatic Computer (EDVAC), a binary stored program system with 5.5KB of internal memory that begun operations in 1951.

12. In 1973, the landmark federal court case Honeywell vs. Sperry Rand voided US patent 3,120,606 for the ENIAC and placed the invention of the electronic digital computer in the public domain. This same ruling also provided legal recognition for <a href=>John Atanasoff</a> as the inventor of the first electronic digital computer. (The Atanasoff-Berry Computer was a non-programmable code-breaking machine that was first put into service in 1942.)



Gotta Comment?
If you've got a comment or opinion you'd like to share, send me an email or fill the comment fields bellow, with only requirements your name and email address. I might just publish you in glorious pixilated black & white! Comments may be edited for grammar, spelling and length, or just to make them better.

Submit your own stories for the Zdenko’s Corner about rides, Gran Fondo’s, having a good time traveling and/or cycling, Croatian cycling history, etc. All stories are very welcome. There are more than 400 stories already in this blog. The search feature at the top right, works best for finding subjects in the blog. There is also translating button at the top of every story so you can translate each page to language of your choice.

Send your comments to:

5 comments to “Computers: 12 Things You Didn’t Know About ENIAC”

  1. Comment by Carroll B. Merriman:

    Wonderful goods from you, man.

  2. Comment by Peter Swist:

    I love that you place excellent content out that is clear and good-written.

  3. Comment by Asian Tv:

    Programming and computer work was considered a “woman’s job” back in the day. Due to having to be exact in small spaces, women’s smaller framed hands were perfect for the job. My grandmother used to work for Xerox for NY City’s database/comms center for the city’s emergency response entities (Police, EMTs, Fire department). When I told her what I was recruited for in the Army back in the 90s, the first words out of her mouth were, “Why did you take a woman’s job?” Of course she knew times changed and we had all a big laugh. The point to all of this is that women have always played a major role in the computer/communications field since the first switchboard operators. Heck, my Aunt was one of the first Tech Control Operators back in the 70s. Until recently, NASA has a group of little old ladies that go over the outputs of the Shuttle’s computers to look for mistakes and correct them. They’ve been working for NASA since they were young women, because computing, again, was considered a woman’s job.

  4. Comment by Paulina Gorneault:

    Please keep the info flowing about this! I think this is among the most important info for me. And I’m glad reading that I stmbled into your article. I wanna remark on some general things; The site style is great, the articles is really excellent : D. Good job, cheers Paulina.

  5. Comment by Wychowanie Dziecka:

    Hello! This is my 1st comment here so I just wanted to give a quick shout out and tell you I truly enjoy reading your blog. Can you recommend any other blogs/websites/forums that cover the same topics?

Leave a Reply